Skip to content

Releasing

Automated release procedure

Starting from release-1.6 branch, ArgoCD can be released in an automated fashion using GitHub actions. The release process takes about 20 minutes, sometimes a little less, depending on the performance of GitHub Actions runners.

The target release branch must already exist in the GitHub repository. If you for example want to create a release v1.7.0, the corresponding release branch release-1.7 needs to exist, otherwise, the release cannot be built. Also, the trigger tag should always be created in the release branch, checked out in your local repository clone.

Before triggering the release automation, the CHANGELOG.md should be updated with the latest information, and this change should be committed and pushed to the GitHub repository to the release branch. Afterward, the automation can be triggered.

Manual steps before release creation:

  • Update CHANGELOG.md with changes for this release
  • Commit & push changes to CHANGELOG.md
  • Prepare release notes (save to some file, or copy from Changelog)

The automation will perform the following steps:

  • Update VERSION file in the release branch
  • Update manifests with image tags of the new version in the release branch
  • Build the Docker image and push to Docker Hub
  • Create a release tag in the GitHub repository
  • Create a GitHub release and attach the required assets to it (CLI binaries, ...)

Finally, it will the remove trigger tag from the repository again.

Automation supports both, GA and pre-releases. The automation is triggered by pushing a tag to the repository. The tag must be in one of the following formats to trigger the GH workflow:

  • GA: release-v<MAJOR>.<MINOR>.<PATCH>
  • Pre-release: release-v<MAJOR>.<MINOR>.<PATCH>-rc<RC#>

The tag must be an annotated tag, and it must contain the release notes in the commit message. Please note that Markdown uses # character for formatting, but Git uses it as comment char. To solve this, temporarily switch Git's comment char to something else, the ; character is recommended.

For example, consider you have configured the Git remote for the repository to github.com/argoproj/argo-cd to be named upstream and are in your locally checked out repo:

git config core.commentChar ';'
git tag -a -F /path/to/release-notes.txt release-v1.6.0-rc2
git push upstream release-v1.6.0-rc2
git tag -d release-v1.6.0-rc2
git config core.commentChar '#'

For convenience, there is a shell script in the tree that ensures all the pre-requisites are met and that the trigger is well-formed before pushing it to the GitHub repo.

In summary, the modifications it does are:

  • Create annotated trigger tag in your local repository
  • Push the tag to the GitHub repository to trigger the workflow
  • Remove trigger tag from your local repository

The script can be found at hack/trigger-release.sh and is used as follows:

./hack/trigger-release.sh <version> <remote name> [<release notes path>]

The <version> identifier needs to be specified without the release- prefix, so just specify it as v1.6.0-rc2 for example. The <remote name> specifies the name of the remote used to push to the GitHub repository.

If you omit the <release notes path>, an editor will pop-up asking you to enter the tag's annotation so you can paste the release notes, save, and exit. It will also take care of temporarily configuring the core.commentChar and setting it back to its original state.

:warning: It is strongly recommended to use this script to trigger the workflow instead of manually pushing a tag to the repository.

Once the trigger tag is pushed to the repo, the GitHub workflow will start execution. You can follow its progress under the Actions tab, the name of the action is Create release. Don't get confused by the name of the running workflow, it will be the commit message of the latest commit to the master branch, this is a limitation of GH actions.

The workflow performs necessary checks so that the release can be successfully built before the build actually starts. It will error when one of the prerequisites is not met, or if the release cannot be built (i.e. already exists, release notes invalid, etc etc). You can see a summary of what has failed in the job's overview page and more detailed errors in the output of the step that has failed.

:warning: You cannot perform more than one release on the same release branch at the same time. For example, both v1.6.0 and v1.6.1 would operate on the release-1.6 branch. If you submit v1.6.1 while v1.6.0 is still executing, the release automation will not execute. You have to either cancel v1.6.0 before submitting v1.6.1 or wait until it has finished. You can execute releases on different release branches simultaneously, for example, v1.6.0 and v1.7.0-rc1, without problems.

Verifying automated release

After the automatic release creation has finished, you should perform manual checks to see if the release came out correctly:

  • Check status & output of the GitHub action
  • Check https://github.com/argoproj/argo-cd/releases to see if the release has been correctly created and if all required assets are attached.
  • Check whether the image has been published on DockerHub correctly

If something went wrong

If something went wrong, damage should be limited. Depending on the steps that have been performed, you will need to manually clean up.

  • Delete the release tag (e.g. v1.6.0-rc2) created in the GitHub repository. This will immediately set the release (if created) to draft status, invisible to the general public.
  • Delete the draft release (if created) from the Releases page on GitHub
  • If Docker image has been pushed to DockerHub, delete it
  • If commits have been performed to the release branch, revert them. Paths that could have been committed to are:
    • VERSION
    • manifests/*

Post-process manual steps

For now, the only manual steps left are to

  • update stable tag in the GitHub repository to point to new the release (if appropriate)
  • update the VERSION file on master if this is a new major release

These may be automated as well in the future.

Manual releasing

The automatic release process does not interfere with the manual release process, since the trigger tag does not match a normal release tag. If you prefer to perform, manual release or if automatic release is for some reason broken, these are the steps:

Make sure you are logged into Docker Hub:

docker login

Export the upstream repository and branch name, e.g.:

REPO=upstream ;# or origin 
BRANCH=release-1.3

Set the VERSION environment variable:

# release candidate
VERSION=v1.3.0-rc1
# GA release
VERSION=v1.3.1

Update VERSION and manifests with the new version:

git checkout $BRANCH
echo ${VERSION:1} > VERSION
make dev-tools-image
make manifests IMAGE_TAG=$VERSION
git commit -am "Update manifests to $VERSION"
git tag $VERSION

Build, and push release to Docker Hub

git clean -fd
make release IMAGE_NAMESPACE=argoproj IMAGE_TAG=$VERSION DOCKER_PUSH=true
git push $REPO $BRANCH
git push $REPO $VERSION

Update GitHub releases with:

  • Getting started (copy from the previous release)
  • Changelog
  • Binaries (e.g. dist/argocd-darwin-amd64).

Update brew formulae (manual)

If GA, update the Brew formula:

brew bump-formula-pr argocd --version ${VERSION:1}

Update stable tag (manual)

If GA, update stable tag:

git tag stable --force && git push $REPO stable --force

Verify release

Locally:

kubectl apply -n argocd -f https://raw.githubusercontent.com/argoproj/argo-cd/$VERSION/manifests/install.yaml

Follow the Getting Started Guide.

If GA:

brew upgrade argocd
/usr/local/bin/argocd version

Sync Argo CD in https://cd.apps.argoproj.io/applications/argo-cd.

Deploy the site.